Shangdong Shengrun Textile Co., Ltd. is one of the most reliable manufacturers and suppliers of washing fire retardant fabric in China. With abundant experience, we warmly welcome you to wholesale customized washing fire retardant fabric made in China here from our factory. If you have any enquiry about quotation, please feel free to email us.
Product Introduction
Washing fire retardant fabric is just like caring for any regular textile-its flame-resistant performance stays reliable through repeated laundry cycles. No harsh chemicals or dry cleaning are needed; a mild detergent and warm water on a gentle cycle do the job perfectly. Designed for everyday use, whether on a home sofa or café seating, this fabric keeps its safety and durability without extra fuss. So you get dependable protection and easy maintenance, all in one practical material.
Product Features
Holds up through repeated washing without losing protection
The flame retardant properties are built to last. Unlike some surface treatments that wash away after a few cycles, this fabric maintains its fire-resistant performance even after 50 industrial washes or more. In fact, some variants have been tested to retain effective flame retardancy after 150 or even 300 washing cycles. The protection doesn't disappear the first time you put it in the machine.
01
Wash in warm water, skip the bleach
For best results, machine wash at temperatures up to 60°C (140°F) – hot enough to remove grease and oil buildup, but not so hot that it stresses the fabric. What you shouldn't use: chlorine bleach, oxygen bleach, peroxide-based products, or fabric softeners. Bleach weakens the fibers and can degrade the flame retardant chemistry, while softeners coat the surface and interfere with how the fabric performs.
02
Avoid hard water and mineral buildup
Washing in hard water over time can leave mineral deposits on the fabric. These deposits aren't just unsightly – they can actually compromise the flame retardant properties. If you're in a hard water area, using a water softener or choosing a detergent with sequestrants helps keep the fabric performing the way it should.
03
Keep it clean – dirt and grease are the real risk
Here's something that surprises a lot of people: the biggest threat to flame retardant performance isn't washing – it's not washing. Oil, grease, and flammable soils that build up on dirty fabric can ignite, and that's far more dangerous than any minor effect laundering might have. Regular washing actually helps maintain safety by removing these contaminants.
04
Gentle drying extends the life of the fabric
After washing, tumble dry on low heat or air dry naturally. High heat can accelerate shrinkage and, in treated fabrics, may affect the stability of the flame retardant coating. Skip the high-temperature tunnel drying if possible – low and slow is the way to go. With proper care, the fabric stays soft, breathable, and ready to protect.
05
Specifications Table
| Parameter | Specification | Notes |
|---|---|---|
| Maximum Wash Temperature | 60°C – 75°C (140°F – 167°F) | 60°C for home washing; 75°C for industrial washing |
| Washing Cycle | Normal / Gentle machine cycle | Gentle cycle recommended for delicate fabrics |
| Maximum Wash Cycles (Durability) | 50 – 100+ cycles | Inherent FR fabrics retain protection after 50+ industrial washes; home wash up to 100 cycles |
| Drying Method | Tumble dry low heat or air dry | Low heat recommended; tunnel drying up to 120°C – 155°C for industrial settings |
| Ironing Temperature | Max 110°C – 150°C (230°F – 300°F) | Low heat, avoid steam |
| Bleach | Do not use | Chlorine bleach not recommended |
| Dry Cleaning | Permitted (gentle cycle) | Perchloroethylene gentle cycle |
| Water Quality | Soft water preferred (< 4.0 grains) | Hard water minerals can form deposits that interfere with FR performance |
Why Choose This Washing Fire Retardant Fabric?
1. It keeps its fire rating wash after wash.
Most treated fabrics start losing effectiveness after 20–30 cycles. Our Washing Fire Retardant Fabric is tested to hold up through 100+ industrial washes – and we test it ourselves, not just rely on a lab certificate. So when you send it out for cleaning, you're not sending away the protection.
2. You don't need special detergents or complicated routines.
Just throw it in with your regular industrial load, use a mild detergent, skip the bleach, and you're good. That means less time training your laundry staff, fewer mistakes, and consistent performance every single time – no guesswork.
3. The finish bonds to the fibers, not just the surface.
We engineered the chemistry so it doesn't flake off or wash out unevenly. Even after repeated scrubbing, you get even protection across the whole garment – not patchy weak spots where the treatment wore thin. That's the difference between "treated" and "locked in."
4. It's built for real-world dirt – grease, oil, and hard water.
We ran our tests with the kind of contaminants you actually see on the job: machine grease, food residue, muddy water. After removing those soils, our fabric still passes the vertical flame test. Hard water minerals? We accounted for that too. This fabric was designed for the wash floor, not the lab bench.
5. You'll replace fewer garments over time – plain and simple.
This fabric doesn't shrink out of spec, doesn't stiffen up, and doesn't lose its FR properties after a few trips through the washer. That adds up to lower replacement costs and less downtime managing inventory. Your crew stays protected, and you don't have to micromanage every laundry cycle to make it happen.
After‑Sales Support
1. We're on the line when you need a wash‑room check.
2. Every shipment comes with a wash log sheet.
3. We back our wash‑durability claim with a replacement guarantee.
4. We'll write a wash schedule that fits your actual equipment.
5. We keep batch‑matched reference swatches in stock.
